Screw the plywood on the top of the frame and slide in the truck.
Then take the 1×10 and trace the profile of your bedsides.
- Cut out and connect with the piano hinge. Install pulls to open.
- I put braces down to hold weight.
- You can add level holders and such if you’re using tools.
Then paint if you want it painted.
I then silicone a 16′ of – 5630 waterproof flexible LED’s…
and a switch to turn them on and off.
This is very bright when dark out.
I hope this helps you build your own drawers. Thanks for viewing.
Thanks to THE GOOSE for this great project!